Wintal DVR4CH Manual de instrucciones

DVR4CH Stand alone Multi-channel Digital Video Recorder User Instruction Manual VERSION 1.0 Before attempting to connect or ope

9Product Introduction 1. Compress  Support PAL/NTSC video format, 25FPS (PAL), 30 FPS (NTSC), H.264; Support both variable bitrate and variable fr

10Chapter II System Installation Section 1 Operating Environment The following operating environment for this DVR must be adhered to: DVR Ope

112. Remove HDD mounting bracket. 3. Fit HDD onto bracket using supplied mounting screws. 4. Replace HDD mounting bracket. 5. Connect the ATX power

12Section 3 Back panel Fig. 2 No. Interface Connection Description 1 (A IN) Audio input connect simulate audio input device, standard BNC in

13considered as an alarm input; ALARM IN port disconnect with GND or has a high voltage (5V) input will be considered as no alarm input by default;

14A and B ends of RS485 can be connected with the Rx+, Rx- on PTZ or High Speed Dome. After all the above connection, please enter the “PTZ” menu to

15Chapter III DVR Operation Section 1 DVR Front Panel Fig. 7 Name specification Power switch Run Working indicator, flashing after boot no

16 1. 4-screen display or the third channel full screen display 2. Select pane “3” in cover area setting 1. 4-screen display or the forth channe

17 Fig. 8 Refer to the section of “DVR Front Panel” for the detailed description of the function of the keys on remote controller. : Screen-split

18 Mouse Option ＊Modify Number Double-click mouse left key to input number or use trolley of mouse to modify number directly. ＊Mo

1Warning  This apparatus must be earthed.  Apparatus shall be connected to a mains socket outlet with a protective earthing connection.  The m

19Chapter IV System operation Section 1 Menu Navigation Fig. 10 Main Menu Sub Menu Function Playback Search recording, playback or backup In

20Transfer Set network transmission resolution, codec type, stream bit, frame rate, image quality for every channel Maintenance Resume default con

21 Cancel buzzer alarm Admin Current login user CH01 Current channel Notation Icon description / Record status and remote preview switch automatica

22Please select a user in “User Login”, then move cursor to password input box and press on front panel to get into input interface in which to in

23Reboot Enter “Main Menu－Advanced－Maintenance” and select ‘reboot’ to reboot DVR manually. Please refer Fig. 13. Schedule reboot is available, if i

24 System Time：Press to get into input interface for time inputting.  Time Format：Setting the time format and DST. Please refer Fig. 15. Fig

25Section 6 Basic Parameter Setup Enter “Main Menu－Advanced－General” as shown in Fig. 16. Fig. 16 Move cursor with and on the front panel and

26Section 7 HDD Management HDD State Inquiry Enter “Main Menu－Information—HDD” as shown in Fig. 17. Fig. 17 Move cursor with and on the fron

27Recording Auto Overwrite  Enter “Main Menu－Rec. &Alarm—General” to setup ‘Auto Overwrite’ function: whether activate overwrite function when

28In this case, DVR can save HDD usage and network bandwidth. If you select CBR, DVR will use the fixed bit rate to compress image.  Frame Rate: F

2Limitation of liability This publication is provided “as is” without warranty of any kind, either express or implied, including but not limited to,

29Please refer Status Bar section. Schedule Recording Enter “Main Menu－Rec. &Alarm—Schedule” as shown in Fig. 21 Fig. 21 Move cursor with and

30 Apply: Press ‘Apply’ to save setting temporarily, if need to set multiple recording periods. For example: set recording periods in 2008-10-20 a

31 Fig. 23 Move cursor with and on the front panel and select item with and .  Record Duration: Length of recording whenever alarm or moti

32Motion Detection/Video Lost/ Video Shelter Alarm Setting Enter ‘Motion’ to set motion detection alarm Fig. 24  Channel：Select one channel for s

33In the course of setting up the parameters, if the parameters needed to be set the same in all channels, you can select ‘ALL’ after finishing the

34 CH：If the “CH” channel is selected as 00, files of all channels will be searched, and at this time, 4 channel playback simultaneously is unavai

35In “searching box”, after moved cursor to a certain record section, use “left” or “right” button to choose the section(“√” signal will show on sel

36Static/DHCP Fig.26 Move cursor with and on the front panel and select item with and .  Mode: Could choose “Static” or “DHCP”. On “Stati

37PPPoE Enter “Network” → “PPPoE Setup” as shown in Fig.27 Fig.27 Please “Enable” “PPPoE Setup”, then input the Username and Password provided by I

38 Max Bit Rate: If you select VBR, when the video input has great movement, we need to limit the max bit rate. The max bit rate selection has rel

3INSTALLATION & SAFEGUARDS Please read these instructions before operating the unit. Installation. Refer all work related to the installation

39enter “User Operation” interface in where to modify password, setup local and remote right, delete user.  Admin：Administrator who has supreme ri

40Authority Setup When you login as “Admin”, you can setup the authority for new users. Operational authority is divided into “Local Rights” and “Re

41 Fig. 34 Remote Rights: Remote rights are for remote operation.  PTZ Control: PTZ control remotely.  Manual REC: Remote setting general record

42 Fig. 35 User manages explain:  User levels have Administrator and Normal user. Can be set 1 Administrator and 29 normal users; Administrator ca

43 Fig. 36 Move cursor with and on the front panel and select item with and .  Channel number: Select one channel for setting.  Activate

44 Fig. 37 Move cursor with and on the front panel and select item with and .  Channel number: connect channel number of decipherer  RS-4

45 Fig. 38 Move cursor with and on the front panel and select item with and . Select a item to restore default setting. Section 16 Inform

46When searching is finished, DVR will list all information. You can press “Previous” or “Next” key to view more information. Version Information En

47Section 17 System Update Method 1: You can update system through DVR_WEB Internet. About the DVR_WEB setting please refer “Chapter Ⅶ”. Method 2:

48Chapter Ⅴ Frequency Asked Questions 1、Can not control DVR with IR controller, but it’s normal while using the front panel. 1) Check whether t

4(Tightening torque: Approx. 0.49 N. m {5 Kgf.cm})  Avoid rapid changes of the temperature/humidity to prevent condensation. (Acceptable change: w

49Chapter Ⅵ Specification Model 4CH processor Embedded high performance processor operation system embedded RTOS Video Video format PAL/NTSC i

50dimensions(W×D×H) 250×260×50mm Operating humidity Humidity 10%～95% operation temperature temperature -10℃～55℃ Appendix 1 HDD Capability

51Chapter Ⅶ IE Monitor Section 1 Introduction The DVR can be visited and controlled by IE browser. IE provides the functions, such as remot

52 2. Input IP address of DVR to “Add this Web site to the zone” text box and click off “√” in the front of “Require server verification(http:) for

53 Please Modify below items（Enable/Disable）then press ‘OK’ to finish setting. a) ［Enable］ Automatic prompting for ActiveX controls. b) ［Enable］I

54

55

56 4. Input Http:// and host IP address in IE address bar. For example: if host IP address is “10.0.0.124” then input Http://10.0.0.124 in IE addre

57Information on Disposal for Users of Waste Electronic Equipment (private households) This symbol on the products and /or accompanying documents me

5Important safety instructions  Read and keep these instructions.  Heed all warning.  Do not connect this unit to an outlet to which appliance

6Content Chapter I Introduction ...

7Section 9 Playback/Backup .........

8Chapter I Introduction Thank you for choosing our standalone Digital Video Recorder System. Please pay attention to these instructions before us